|High-Wear Parts Reduced
||The Sullair breakers have eliminated most
high-wear parts. Fewer parts mean less wear, less maintenance, and less
|One Piece, Non-Protrusive Housing
||A leak-proof air cushion forms at the end of
the piston stroke and stops the piston from direct impact when the tool is
not breaking. The elimination of side rods, nuts and springs makes Sullair
breakers sleeker and more comfortable to operate.
|Minimal Lubrication Required
||With only two parts moving during operation,
normal oil carry-over from the compressor, combined with moisture in the
air, will usually provide sufficient lubrication under normal operating
conditions. Manual lubrication before storage is sufficient.
|Direct Impact Piston
||One moving impact part minimizes maintenance.
||Standardization of design permits a high
degree of interchangeability of parts between Sullair models.
|Improved Latch Design
||Durable double roll pin permits easy steel
||The piston, impacting directly on the steel
shank rather than a tappet, reduces noise level of the breaker.
||A unique silencer reduces noise levels by 6
dBA, while preventing the tool from freezing, even in the coldest
|Flex Handle Option
||The flex handle option reduces up to 60% of
the vibration to the operator without a loss of power.
||Reduced kickback is less fatiguing to the
|Less Air Consumption
||The direct impact piston design, non-corrosive
automatic valve and one-piece housing dramatically reduce air consumption.
You can operate more tools from a single compressor. For example, a 125
cfm compressor will operate two MPB 90 breakers from one compressor.
|Two-Year Limited Warranty
||All Sullair breaker parts are warranted for
two years against manufacturing defects. Additionally should a part wear
out during normal operation, it is covered by Sullairís exclusive