C.E.S.
Construction Equipment Solutions
1064 Salk Road, Unit #13
Pickering, Ontario ~ L1W 4B5
Pickering, ON
Tel: (905) 420-2243  ~  Fax: (905) 420-9655

Sullair Chipping Hammers

hammers
Specifications, Weights and Dimensions -- Chipping Hammers
Model Weight lbs Length inch Bore & Stroke in Impact Rate blows/min Air Consump. cfm Air Inlet NPT Ship Weight lbs Chuck Size
                 
MCH-2 16 5/8 14 1 1/8 x 3 2300 26 3/8 NPT or 7/8-24 18 .680 round
.580 hex
MCH-3 17 3/4 15 1/4 1 1/8 x 3 3/4 2100 29 3/8 NPT or 7/8-24 19 .680 round
.580 hex
MCH-4 18 5/8 16 1/2 1 1/8 x 4 1/4 1700 33 3/8 NPT or 7/8-24 20 .680 round
.580 hex
MLC-10 12 14 1/2 1 7/64 x 1 13/16 2940 18 3/8 NPT or 7/8-24 14 .680 round
.580 hex
Four Bolt Backhead This unique design reduces handle breakage. The common problem of a threaded handle-to-barrel connection coming loose and damaging the handle and internal parts has been eliminated.
D-Handle The strong “D” configuration is large enough to provide a comfortable, sure grip, even for a gloved hand.
Minimal Lubrication Required With its unique design and materials, normal oil carry-over from the compressor, combined with moisture in the air, will usually provide sufficient lubrication under normal operating conditions.
Smoother Operation The Sullair chipping hammer’s unique backhead design results in greater operator comfort.
Choice of Stroke Length and Bushings The Sullair chipping hammer is available in 2", 3" and 4" strokes with either .680 round or .580 hex bushings.
Choice of Retainers Oval collar retainers are included as standard. Optional retainers available are universal ball type, round collar, or quick change segment retainers.
Exhaust Deflector A durable molded exhaust deflector directs exhaust air away from the operator.
Air Inlet Option Two air inlet bushings are furnished: 3/8" NPT and 7/8-24, internal thread. The bushings provide for versatile hose connections while protecting the handle inlet threads.
Limited Parts Warranty Sullair provides a limited parts warranty of two years on the handle and one year on all other parts except the retainer and retainer springs. In addition, should a part other than the retainer or retainer spring wear out during normal operation, it is covered by Sullair’s exclusive chipping hammer warranty.

Specifications subject to change without notice.

Back